Intended Use; Technical Data; Functional Description - Festool TPC 18/4 Original Instructions Manual

English
duce your exposure to these chemicals: work in
a well ventilated area, and work with approved
safety equipment, such as dust masks that are
specially designed to filter out microscopic par­
ticles. Wash hands after handling.
WARNING
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL.
4

Intended use

Cordless impact drill suitable
5

Technical data

Cordless impact drill
Motor voltage
No-load speed*
Max. torque
Adjustable torque**
Chuck clamping range
Max. drill diameter
Screwdriving in spruce
Tool holder in drill spindle
Weight as per EPTA Procedure 01:2014 (with auxiliary handle,
BP 18 Li 6.2 AS battery pack and chuck)
Weight incl. Centrotec, excl. auxiliary handle and battery pack.
* Speed values based on fully charged battery pack.
** The maximum speed (value for clockwise rotation) is reduced in the lower torque settings.
6

Functional description

[1-1]
Buttons for releasing the battery pack
[1-2] Capacity indicator button on battery
pack
[1-3]
Capacity indicator
[1-4] LED light
10
– for drilling in metal, wood, plastics and
similar materials,
– for impact drilling in brickwork, masonry
and stone,
– for screwing in and tightening screws.
– intended for use with BP Festool battery
packs of the same voltage class.
The user is liable for damage and acci­
dents caused by improper and non-in­
tended use; this also includes damage and
wear caused by continuous industrial operation.
1. gear
2. gear
3. gear
4. gear
Soft material (wood)
Hard material (metal)
1st gear/2nd gear
Wood
Metal
Masonry (tiles)
Max. ∅
[1-5] On/off switch
[1-6] Collar
[1-7] Auxiliary handle
[1-8]
Drilling/impact drilling selector
switch
[1-9] Gear switch
TPC 18/4
18 V
0 - 500 min
0 - 800 min
0 - 2350 min
0 - 3600 min
50 Nm
75 Nm
2–20 Nm
1/16" - 1/2" (1.5–13 mm)
2-3/4" (70 mm)
1/2" (13 mm)
3/8" (10 mm)
3/8" (10 mm)
1/4"
5.7 lbs (2.6 kg)
3.1 lbs (1.4 kg)
-1
-1
-1
-1