Tar River Greenscape 750 Operator's Manual page 31

Greenscape 750 Food Plotter No Till Drill
Item Part #
40 BM061025
41 NM0610
42 SA4027
SA4028
43 NM1620L
NM1620
Note: Warning! When removing/replacing Disc Assembly Studs note that the LH & RH studs have different thread pat-
terns! Using the wrong stud will cause damage to the stud and or the seed drill casting!
SA4027 Stud, disc assembly LH has LH threads on both ends of the stud. SA4028 Stud, disc assembly RH has RH threads on
both ends of the stud. These parts are not interchangeable! The LH stud must be used on the LH side of the Seed drill casting.
The RH stud must be used on the RH side of the Seed drill casting.
Removing Disc Assembly studs:
LH - Facing the LH side of the Disc Assembly, turn the nut on the stud in a clockwise rotation.
RH - Facing the RH side of the Disc Assembly, turn the nut on the stud in a counter-clockwise rotation.
Re-attaching Disc Assembly studs:
LH - Facing the LH side of the Disc Assembly, turn the nut on the stud in a counter-clockwise rotation.
RH - Facing the RH side of the Disc Assembly, turn the nut on the stud in a clockwise rotation.
Disc Assembly
Description
Bolt M6-1.0x25
Nut M6-1.0
Stud, disc assembly *Warning! See note below.
Stud, disc assembly *Warning! See note below.
Nut M16-2.0 LH threads (for SA4027 LH stud only)
Nut M16-2.0 (for SA4028 RH stud only)
31
Qty.
60
60
10
10
10
10