Advertisement
1. CEA-2006 Compliant — Standardized "Voluntary" Testing & Measurement Methods for
Mobile Audio Amplifiers. This standard advocates a uniform method for determining an
amplifier's RMS power and signal-to-noise ratio. Using 14.4 volts, RMS watts are measured
into a 4-ohm impedance load at 1 percent Total Harmonic Distortion (THD) plus noise, at a
frequency range (for general purpose amplifiers) of 20 Hz to 20,000 Hz.
© 2012 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without
written permission is prohibited. Sony is a trademark of Sony. All other trademarks are the
property of their respective owners. Features and specifications are subject to change
without notice. /Updated: March 9, 2012
Advertisement
