Special Wash Cycles And Options - Hotpoint Ariston LLK 7M121 Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17

Special wash cycles and Options

Notes:
EN
Optimum performance levels when using the "Fast" and "Express
30'" cycles can be achieved by respecting the specified number
of place settings.
To reduce consumption, only run the dishwasher when it is full.
Note for Test Laboratories: for information on comparative EN
testing conditions, please send an email to the following address:
ASSISTENZA_EN_LVS@indesitcompany.com
Wash options*
The OPTIONS may only be set, changed or reset after
the wash cycle has been selected and before the Start/
Pause button has been pressed.
Only the options which are compatible with the type of wash
cycle set may be selected. If an option is not compatible
with the selected wash cycle
corresponding symbol/indicator light flashes rapidly 3 times.
If an option is selected which is not compatible with another
previously-selected option, it will flash 3 times and go off,
while the most recently selected option will remain active.
To deselect an option which has been set by mistake, press
the corresponding button again.
Delayed Start option
It is possible to delay the start of the cycle for a period
of time between 1 and 24 hours.
1. After selecting the desired wash cycle and any other options,
press the DELAYED START button: the indicator light will go on.
Press the DELAYED START button to select the time at which
you wish the wash cycle to begin (1 to 24 hours.)
2. Confirm your selection using the Start/Pause button; the
countdown will begin. The selected delay period is displayed.
3. Once this time has elapsed, the DELAYED START indicator
light goes off and the wash cycle begins.
To deselect it, press and hold down the DELAYED START button
until the text OFF appears.
The Delayed Start function cannot be set once a wash
cycle has been started.
28
(see Table of wash cycles)
, the
Multi-Functional Tablets option (Tabs)
This option optimises washing and drying results.
When using multi-functional tablets, press the MULTI-
FUNCTIONAL TABLETS button; the corresponding symbol
will light up. If the button is pressed again, the option will
be deselected.
The Multi-Functional Tablets option results in a longer
wash cycle.
The use of tablets is only recommended in models
having this option and it is not recommended with wash
cycles which do not specify the use of multi-functional
tablets.
Zone Wash
This option makes it possible to carry out the wash
cycle in the selected rack only. Select the wash cycle and
then press the ZONE WASH button: the selected rack lights
up and the wash cycle starts in the selected rack only. Press
the button again to deselect the option.
The option is available with the following wash cycles:
Intensive and Normal.
Select the option and the Intensive cycle to start the
ULTRAINTENSIVE ZONE washing. This wash cycle is ideal
for very soiled mixed loads, e.g. pans and saucepans,
dishes with heavy encrustation or difficult-to-clean crockery
(grater, vegetable mill, dirty cutlery). The spraying pressure is
stronger and the washing temperature higher, thus ensuring
optimum handling of stubborn stains.
Select the option and the Normal cycle to start the SAVING
ZONE washing. This function makes it possible to reduce
energy consumption. Cycle duration might change.
Remember to load the crockery in the selected rack only
Extra drying
To improve the dryness level of the crockery, press
the EXTRA DRYING button and the symbol will light up. If it
is pressed again, the option will be deselected.
A higher temperature during the final rinsing and a longer
drying phase improve the dryness level.
The EXTRA DRYING option increases the duration of
the wash cycle.

Advertisement

Table of Contents
loading

Table of Contents