Table of Contents
Advertisement
3.3.16
Onboard Devices Configuration
HD Audio Controller
Allows you to control detection of the HD-Audio device.
Configuration options: [Enabled] [Disabled]
[Enabled]
[Disabled]
LAN1 I225
Configuration options: [Disabled] [Enabled]
LAN2 I210
Configuration options: [Disabled] [Enabled]
M.2 WiFi
Allows you to enable or disable M.2 WiFi. Configuration options: [Disabled]
[Enabled]
M.2 BT
Allows you to enable or disable M.2 BT.
Configuration options: [Disabled] [Enabled]
CPU PCIEX16 switch function
Configuration options: [2x8] [1x16]
3.3.17
Miscellaneous
DMI/OPI Configuration
DMI Gen3 ASPM
Configuration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L1]
[ASPM L0sL1]
DMI ASPM
Configuration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L1]
[ASPM L0sL1]
PCI Express Configuration
DMI Link ASPM Control
Allows you to disable or control Active State Power Management on SA side
of the DMI link. Configuration options: [Disabled] [L1] [Auto]
3.3.18
APM Configuration
This item allows you to configure APM (Advanced Power Management) settings.
ErP Ready
Allows BIOS to switch off some power at S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Configuration options: [Disabled] [Enabled]
Chapter 3: BIOS setup
Enables the HD Audio Device unconditionally.
Disables the HD Audio Device unconditionally.
3-13
Advertisement
Table of Contents
