Software Update; Main Sw Update; Dısplayport Fw Update; Hdmi Splitter Fw Update - VESTEL MB120 DS Service Manual

• Integrated Oscillator-Fail Detection
• 8-Pin SOIC Package
• –40°C to 85°C Ambient Operating Temperature
Pin Configuration and Functions

17. SOFTWARE UPDATE

A. MAIN SW UPDATE
In 17MB120DS project, please follow software update procedure:
1. mb120_en.bin, RomBoot.bin, PM51.bin and usb_auto_update_G6F.txt documents should be copied directly
inside of a flash memory (not in a folder).
2. Insert flash memory to the TV when TV is powered off.
3. While pushing the OK button in remote control, power on and wait. TV will power-up itself.
4. If First Time Installation screen comes, it means software update procedure is successful.
B. DISPLAYPORT FW UPDATE
Please follow DP fw update procedure:
1. Connect DP source with DP input port of 17MB120DS.
2. Run McdpAuxISPTool on source.
3. Choose the correct "Driver File" and "FW File", then click to start.
4. After update process, new version could be check with "Get FW Version" button on tool.
C. HDMI SPLITTER FW UPDATE
Please follow HDMI splitter fw update procedure:
1. Connect Mstar tool via RJ12 service socket with HDMI fw cable.
2. Run EPConsole program on PC after power on the MB120DS.
57