M-Bit [16M X 1] Cmos Serial Flash Eeprom; Mx25L1606E Spi Flash - VESTEL MB120 DS Service Manual

9. 16M-BIT [16M X 1] CMOS SERIAL FLASH EEPROM

A. MX25L1606E SPI FLASH
Features
General
• Single Power Supply Operation
− 2.7 to 3.6 volt for read, erase, and program operations
• Serial Peripheral Interface compatible -- Mode 0 and Mode 3
• 8M: 8,388,608 x 1 bit structure or 4,194,304 x 2 bits (Dual Output mode) structure
16M: 16,777,216 x 1 bit structure or 8,388,608 x 2 bits (Dual Output mode) structure
• 256 Equal Sectors with 4K byte each (8Mb)
512 Equal Sectors with 4K byte each (16Mb)
− Any Sector can be erased individually
• 16 Equal Blocks with 64K byte each (8Mb)
32 Equal Blocks with 64K byte each (16Mb)
− Any Block can be erased individually
• Program Capability
− Byte base
− Page base (256 bytes)
• Latch-up protected to 100mA from -1V to Vcc +1V
Performance
• High Performance
− Fast access time: 86MHz serial clock
− Serial clock of Dual Output mode : 80MHz
− Fast program time: 1.4ms(typ.) and 5ms(max.)/page
− Byte program time: 9us (typical)
− Fast erase time: 60ms(typ.) /sector ; 0.7s(typ.) /block
• Low Power Consumption
− Low active read current: 16Mb: 25mA(max.) at 86MHz; 8Mb: 12mA(max.) at 86MHz
− Low active programming current: 20mA (max.)
− Low active erase current: 20mA (max.)
− Low standby current: 25uA (max.)
− Deep power-down mode 5uA (typical)
• Typical 100,000 erase/program cycles
• 20 years of data retention
Software Features
• Input Data Format
− 1-byte Command code
• Advanced Security Features
− Block lock protection
− The BP3-BP0(16Mb) ; BP2-BP0(8Mb) status bit defines the size of the area to be software protection
against program and erase instructions
− Additional 512 bit secured OTP for unique identifier
• Auto Erase and Auto Program Algorithm
− Automatically erases and verifies data at selected sector
37