Dmx Modes - ADJ ELEMENT HEX User Manual

DMX Mode:
Operating through a DMX controller gives the user the freedom to create their own programs tai-
lored to their own individual needs. The Element Hex has 5 DMX modes: 6 channel mode, 7 channel
mode, 8 channel mode, 11 channel mode, and 12 channel mode. See the DMX Traits section of this
manual for each modes DMX traits. This function will allow you to control each individual fixture's
traits with a standard DMX 512 controller.
1. To run your fixture in DMX mode press the MODE button until "d.XXX" is displayed. "XXX" rep-
resents the current displayed DMX address. Use the UP or DOWN buttons to select your desired
DMX address, then press the SETUP button to select your DMX Channel mode.
2. Use the UP or DOWN buttons to scroll through the DMX Channel modes. The Channel modes
are listed below:
• To run the 6 Channel Mode, press the MODE button until "Ch06" is displayed.
• To run the 7 Channel Mode, press the MODE button until "Ch07" is displayed.
• To run the 8 Channel Mode, press the MODE button until "Ch08" is displayed.
• To run the 11 Channel Mode, press the MODE button until "Ch011" is displayed.
• To run the 12 Channel Mode, press the MODE button until "Ch012" is displayed.
3. After you have chosen your desired DMX address and channel mode plug in the fixture via the
XLR connections to any standard DMX controller.
DMX MODE
14