Parts Identification - Sony UNA-EN1 Operating Instructions Manual

Parts identification

When connecting the USB-Ethernet adaptor, do so correctly by checking
the shape of the connectors.
USB cable
USB connector : For connection to a USB compatible camcorder.
RJ-45 connector : For connection to the LAN cable.
LINK Lamp
The status of the lamp indicates the communication status of the USB-
Ethernet adaptor :
Lamp
Orange On
Flashing
Green On
Flashing
– Off
MAC address
Rear
8-GB
Useable LAN cables
An unshielded twist pair straight cable (UTP)
• Category 3, 4, 5 with 10BASE-T
• Category 5 with 100BASE-TX
Meaning
10BASE-T communicating,
10BASE-T communicating,
100BASE-TX communicating,
100BASE-TX communicating,
not communicating
Mac address
(label)
LINK lamp
RJ-45 connector
USB connector
no data transmission
transmitting data
no data transmission
transmitting data
A cable modem may require the
MAC address to be set. In that
case, record the entry data (letters
and numbers) written on this
label.