Sony AC-UD10 - AC Adapter Operating Instructions

Also See for AC-UD10:

Operating instructions (2 pages)

Table of Contents

Contents

1 Introduction
2 Identifying the parts
3 How to Use
4 Specifications
5 Documents / Resources
- 5.1 References
- 5.2 Download manual

Sony AC-UD10 - AC Adapter Operating Instructions

Introduction

Compatible with USB rechargeable "Cyber-shot" and "Handycam".
The available functions differ depending on the device.
Please make sure the specifications of your devices. "Cyber-shot", "Handycam", and "WALKMAN", are registered trademarks or trademarks of Sony Corporation.

Other rechargeable devices (as of 2011/9) USB rechargeable "WALKMAN", USB rechargeable Sony IC recorders, USB rechargeable Sony wireless stereo headsets/wireless audio receivers, iPhone, iPod (4th generation or later), iPod classic, iPod touch, iPod nano, iPod shuffle (2nd generation or later)
iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Identifying the parts

AC Adaptor
AC Power cord
USB cable

How to Use

See the figure above.

Connect the AC adaptor to the device (Cybershot, Handycam, etc.) using the USB cable (supplied with your camera).
Connect the AC power cord of the AC adaptor to an AC outlet.
Set the device to recharge.
It may not be necessary to set the device to recharge. (See device's instruction manual.)

Notes

Connect the AC power cord of the AC adaptor to an AC outlet. In the case of a problem, unplug from the AC outlet immediately.
Use in ambient temperature between 0°C – 40°C.
Performance is not guaranteed in case of using a USB hub or USB extension cable. Follow the connection method designated by the connected device (Cyber-shot, Handycam, etc.).

This unit supports worldwide voltages 100 V to 240 V.
Do not use an electronic voltage transformer, as this may cause a malfunction.

Specifications

Input voltage	AC 100 V – 240 V, 50 Hz/60 Hz
Rated output voltage	DC 5.0 V
Rated output current	1500 mA
Dimensions	Approx. 78 mm × 22 mm × 36 mm (Approx. 3 ¹/₈ in × ⁷/₈ in × 1 ⁷/₁₆ in) (w/h/d)
Mass	Approx. 45 g (1.6 oz)
Included Items	AC Adaptor (AC-UD10) (1) AC Power cord (mains lead) (1) Set of printed documentation