Troubleshooting - Sony MSAC-PC3 Operating Instructions Manual

Troubleshooting

Symptom
The [Removable Disk]
icon is not displayed.
The access lamp blinks
when a "Memory Stick" is
inserted.
Reading data on the
"Memory Stick", writing
data to the "Memory
Stick", and copying may
cause a blue screen and
warning to appear.
Writing data to or
deleting data from the
"Memory Stick" may
appear to be taking place,
but the data on the
"Memory Stick" has not
been changed.
Cause/Solution
•Not connected correctly.
t Connect correctly. (Page 9)
•The Device driver is not installed.
t Install the Device driver in the right
way. (Page 9)
•"Memory Stick" is not inserted.
t Insert a "Memory Stick."
•Foreign matter adhering to the
connector section of the "Memory
Stick."
t Check whether dust or dirt is
adhering to the connector section of
the "Memory Stick."
Remove any foreign matter and
insert the "Memory Stick" again.
• The "Memory Stick" is write-protected.
t Unlock the LOCK switch (Page 26).
• The "Memory Stick" is set as a "Local
Disk" (When Using Windows 98/
Windows 98SE/Windows Me).
t Change the drive settings for the
"Memory Stick" to "Removable
Disk" (Page 13).
• The "Memory Stick" is write-protected.
t Unlock the LOCK switch (Page 26).
t Do not write to the "Memory Stick"
with the LOCK switch in the locked
position.
• The "Memory Stick" is set as a "Local
Disk" (When Using Windows 98/
Windows 98SE/Windows Me).
t Change the drive settings for the
"Memory Stick" to "Removable
Disk" (Page 13).
29-US