Table of Contents
Advertisement
Additional Information
:.:...,.:<...::;.»>.::,...;.:.:.,: ..:'.:.::'.:.-.:.........'.: .. :.::',,:,::,-.,:,:,,,,.. ,:.:'.
Troubleshooting
Should you encounter a problem
with your
unit~
find your problem
in the troubleshooting checklist
below and take the indicated
corrective action. If the problem
persists~
contact your Sony dealer.
Note that if service personnel
changes some parts during
repair~
these parts may be retained.
When bringing the system in for
repairs, be sure to bring in the
entire system.
This product is a system
product~
and the entire system is needed to
determine the location requiring
repaIr.
The LED indicator flashes.
• Remove the iPod, and turn the
A
V
system off. then on again.
If the LED indicator still flashes,
consult your nearest Sony dealer.
The remote does not function.
• Update your iPod to use the
latest software hefore you use i
l.
• Remove any
ohstacle~.
• Point the remote at the A
V
svstem (DA
V
series. etc. )'s
sensor.
• The distance het\veen the
remote and the A
V
system is too
far.
• Replace the battery.
• Make sure the iPod* is securely
connected.
• Select the DMPORT function
on the AV system.
• Turn on and off the AV system.
Video/photo image from the
iPod does not appear on the TV
screen.
• Set the operating mode to iPod
Display mode to display photo
images (page 10).
• Make the connection according
to your AV system (page
7).
• When browsing the on screen
display through the DIGITAL
MEDIA PORT cable:
Disconnect the video cable from
the VIDEO OUT jack.
• When browsing the on screen
display through the VIDEO
OUT jack:
Switch the TV input to the video
input connected to this unit.
• Check that the TV output setting
on the iPod is on (Refer to the
user's guide of your iPod).
• Check that the iPod* is
compatihle with video output
(Refer to the user's guide of
your iPod).
Video/photo image from the
iPod does not appear on the
iPod display.
• Adjust the video/photo image
output settings to the
appropriate settings.
Advertisement
Table of Contents
