ASROCK DeskMini B660 Series Manual page 48

MRC Training Respond Time
Try Slowest MRC Training.
Realtime Memory Timing
Configure the realtime memory timings.
[Enabled] The system will allow performing realtime memory timing changes after
MRC_DONE.
Reset for MRC Failed
Reset system after MRC training is failed.
MRC Training on Warm Boot
When enabled, memory training will be executed when warm boot.
MRC Fast Boot
Enable Memory Fast Boot to skip DRAM memory training for booting faster.
Voltage Configuration
Adapter Select
Select the adapter. The default value is set to be [Auto].
DRAM Voltage
Use this to configure DRAM Voltage. The default value is [Auto].
Save User Default
Type a profile name and press enter to save your settings as user default.
Load User Default
Load previously saved user defaults.
Save User UEFI Setup Profile to Disk
It helps you to save current UEFI settings as an user profile to disk.
Load User UEFI Setup Profile from Disk
You can load previous saved profile from the disk.
42