METHVEN EDGE RAIL Installation Manual

Download this manual

CARE AND CLEANING:

Never use abrasives or abrasive cleaning agents to

clean this product. Clean regularly with

contamination free warm soapy water and a damp

soft cloth.

Clean ﬁlter washer

periodically

Methven warrants this product against manufacturing defects and that it is suitable for use

under the general operating conditions speciﬁed in this instruction sheet. However, regional

regulations apply and may aﬀect your warranty. Please refer to www.methven.com or call

customer service for full details.

New Zealand

0800 804 222

439970

Australia

1300 638 483

0800 195 1602

EDGE RAIL

INSTALLATION GUIDE

TECHNICAL SPECIFICATIONS:

Inlet Connections:

All ½" BSP

ISSUE B

Need help?

Do you have a question about the EDGE RAIL and is the answer not in the manual?

Page 1 Clean ﬁlter washer periodically Methven warrants this product against manufacturing defects and that it is suitable for use under the general operating conditions speciﬁed in this instruction sheet. However, regional regulations apply and may aﬀect your warranty. Please refer to www.methven.com or call customer service for full details.
Page 2 Cone brackets. To adjust slider friction IF HANDSET, HOSE OR WATER OUTLET ARE SUPPLIED: rotate side piece Connect hose to water outlet and Methven anti-clockwise to loosen handset. Ensure swivelling cone is connected to and clockwise to tighten. the handset.