Advertisement
Quick Links
Instruction Manual
Cordless grass and shrub shears
RAC36CS-UK
Translation of Original Instructions
Read carefully this manual before any use. This manual contains important
recommendations concerning the safety.
32 rue aristide Bergès - ZI 31270 Cugnaux – France
1
Advertisement
Related Manuals for Racing RAC36CS-UK
Summary of Contents for Racing RAC36CS-UK
- Page 1 Instruction Manual Cordless grass and shrub shears RAC36CS-UK Translation of Original Instructions Read carefully this manual before any use. This manual contains important recommendations concerning the safety. 32 rue aristide Bergès - ZI 31270 Cugnaux – France...
- Page 2 Safety Instructions Cordless Grass and Shrub Shears Please read and save these instructions. TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
- Page 3 a power tool. Distractions can cause you to lose control. 2) Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
- Page 4 suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. NOTE the term “residual current device (RCD)”...
- Page 5 in the off-position connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on.
- Page 6 tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
- Page 7 f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
- Page 8 connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
- Page 9 Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or storing the hedge trimmer always fit the cutting device cover. Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades. ...
- Page 10 Even if you use this product in compliance with all safety requirements, the potential risks of injury and damage remain. The following hazards may arise in the structure and design of this product: a. There are harmful health consequences resulting from the emission of vibrations if the product is used for long periods of time or not properly managed and properly maintained.
- Page 11 e. Inhalation of particles f. Unattended projections g. Contact with foreign objects h. Contact with the tool in operation i. Hearing loss in the absence of correct hearing protection General safety regulations for electric tools This equipment is not designed to be used by people (including children) with limited physical, sensory or mental capacities or those with no experience and/or knowledge unless they are supervised by a person who is responsible for their safety or they have received instructions from such a person in how to use the equipment safely.
- Page 12 • Wear suitable work clothes. Wear safety goggles. • Never open the battery pack. Avoid contact with a leaking battery pack. In case of accidental contact, wash the affected area of skin with soap and water. If battery acids gets in your eye, rinse out the eye with clear water for at least 10 minutes and seek a doctor’s advice immediately.
- Page 13 Rechargeable batteries and cordless electric machines and tools contain materials that are potentially harmful to the environment. Never place any cordless electric machines or tools in your household refuse. When cordless electric machines or tools become defective or worn, remove the rechargeable batteries and return them to iSC GmbH Eschenstrasse 6, D-94405, Germany.
- Page 14 Never remove any such objects with your fingers as the pre-tensioned blade can cause serious injuries through cutting. • Keep the air vents clean. • Keep the charging cable away from the blades. Never use the device with the charging cable plugged in.
- Page 15 - before inspecting or cleaning the machine and before carrying out any work on it; - if it begins to vibrate excessively. • Hold the power tool by the insulated handles because the blade may strike concealed power cables. Contact between the blade and a live cable can make the metal parts of the equipment live and will cause an electric shock.
- Page 16 Fig. 1 Fig.2 Fig. 3 Fig. 4 Fig. 5...
- Page 17 Fig. 6 Important! When using the equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating instructions and safety regulations with due care. Keep this manual in a safe place, so that the information is available at all times. If you give the equipment to any other person, hand over these operating instructions and safety regulations as well.
- Page 18 Risk of injury! 4. Dispose of batteries correctly! 5. Protect the tool from the damp and never expose it to rain. 6. Guaranteed sound power level: 87dB 2. Layout and items supplied 2.1 Layout (Fig. 1) 1 Grass cutter blade 2 Blade release mechanism 3 Safety lock-off 4 ON button...
- Page 19 • Safety instructions 3. Proper use The equipment is designed for cutting the edges of lawns and small areas of grass in private and hobby gardens. Tools for private and hobby gardens are not suitable for use in public facilities, parks and sport centers, along roadways, on farms or in the forestry sector.
- Page 20 sound pressure level: ........73 dB sound power level: .......... 84 dB Kuncertainty ............3 dB Vibration a : ............2.5 m/s Kuncertainty ............1,5 m/s Weight: ..............583g Battery charger Mains voltage......100-240V AC ~ 50-60 Hz Output Rated voltage ............. 5V DC Rated current: ............
- Page 21 5.1 Charging the battery pack (Fig. 2) • Connect the charger to the charging station (Fig. 2). • Check that your mains voltage is the same as that marked on the rating plate of the battery charger. Plug the battery charger in a socket-outlet. The red LED (Fig. 2 / Item 1) comes on to indicate that charging voltage is available.
- Page 22 as shown in Fig. 3 / Item 2. Once you have removed the blade you will be able to see the toothed wheels of the gear unit (Fig. 4). Make sure that no dirt gets into the gear unit when you change the blade. To assemble, proceed in the reverse order.
- Page 23 • To achieve good results you should keep the blades sharp at all times. In particular we recommend that you immediately level off any jags or ridges caused by stones or the like. The tool should be thoroughly cleaned both before and after use. •...
- Page 24 Recycling alternative to the return request: As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment. The old equipment can be returned to a suitable collection point that will dispose of the equipment in accordance with the national recycling and waste disposal regulations.
- Page 25 ZI, 32 rue aristide Bergès – 31270 Cugnaux - France Tel : +33 (0)5.34.502.502 Fax : +33 (0)5.34.502.503 declares that the machines: Cordless grass and shrub shears RAC36CS-UK Serial No.: have been designed in compliance with the following standards: EN 60335-1:2012/A11:2014 EN 60745-1:2009/A11;2010...