General Cleaning - AGA GC PV Operating Instructions Manual

Gas fired cookers
Hide thumbs Also See for GC PV:
Table of Contents

Advertisement

Available languages

Available languages

TO EXTINUGISH THE BURNER
SHORT PERIODS
Turn the combination gas valve thermostat knob 2
clockwise until the knob symbol
register point. This will extinguish the main gas burner
leaving the pilot flame alight, and will maintain some
warmth within the range during the period of non-use.
LONG PERIODS
To completely extinguish the pilot burner, set the knob to
symbol l. Turn the service gas cock (1) to the OFF
position.
SERVICE
The burner should be checked and cleaned at regular 12-
month intervals and arrangements should be made with
your AGA Distributor or local Gas Company for regular
maintenance.
FIG A
FIG B
FIG C
FIG D
is adjacent to its
OFF
IGNITION
WHITE BLOCK
LOW FIRE
GREEN BAND
NORMAL RUNNING
4

GENERAL CLEANING

WARNING: DISCONNECT ELECTRICAL SUPPLY
BEFORE SERVICING THIS APPLIANCE.
DO NOT USE A STEAM CLEANER TO CLEAN THIS
RANGE.
All that is needed to keep the vitreous enamelled surfaces
of the AGA bright and clean is a daily rub over with a
damp cloth and, maybe a little soapy water , followed by
a damp cloth only.
If milk or fruit juice, or anything containing acid is spilt on
the top plate or front plate, be sure to wipe off
immediately. Also clean off condensation streaks on the
front plate around oven doors, or the vitreous enamel may
be permanently discoloured.
The linings of the insulated lids and oven doors may be
cleaned with a soapy pad, open the lids and lift off the
oven doors to allow them to cool a little before cleaning.
Do not, however, immerse the doors in water as they are
packed with insulating material, and this may be damaged
by excessive moisture.
The Roasting Oven (and the Baking Oven in Model GE)
keeps itself clean and merely needs to be brushed out
occassionally with a long-handled stiff brush. The
Simmering Oven and Plate Warming Ovens may be
cleaned with a stiff brush and a damp soapy cloth. The
wire brush is provided for cleaning the hot plates.
OFF
ON
DESN 210252 A

Advertisement

Table of Contents
loading

Table of Contents