Connecting A Digital Tv Receiver - Sony WEGA KZ-32TS1 Operating Instructions Manual

Installing and Connecting the TV

Connecting a Digital TV Receiver

14
(US)
Disconnect all power sources before making any connections.
1
Using three separate component video cables, connect the Digital TV
Set-top box's Y, P
Notes
• The Y, P and P
B R
sound.
• Component video (Y, P
formats. Note that this TV displays all format types of picture in a resolution of 852 dots ×
1024 lines (KZ-32TS1), or 1024 × 1024 (KZ-42TS1).
2
Using an AUDIO cable, connect the Digital TV Set-top box's Audio
OUT jacks to the TV's AUDIO IN jacks.
Rear of TV
R AUDIO
AUDIO-R (red)
Digital TV Set-top box AUDIO-L (white)
Notes
• You cannot record the signal from any equipment connected into the Y, P
connectors.
• This TV is not compatible with digital TV receivers configured with RGB or VGA output
connectors.
and P jacks to the TV.
B R
jacks do not provide audio, so audio cables must be connected to provide
, P ) connection is necessary to view 480i, 720p, and 1080i
B R
VIDEO IN 1 COMPONENT VIDEO IN 1
L VIDEO S VIDEO R AUDIO L Y
Y/G
R AUDIO L
VIDEO IN 2 COMPONENT VIDEO IN 2 / RGB IN
RK-74A (not supplied)
VHF/UHF
AUDIO OUT
P P R L
B R
CONTROL
IN
S
P /B P /R
HD VD
B R
OUT
SUB
WOOFER
P
R
P
B
Y
VMC-10HG (not supplied)
and P
B
AC IN
R