Connecting A Digital Tv Receiver - Sony WEGA KLV 21SR2 Operating Instructions Manual

Connecting a Digital TV Receiver

Disconnect all power sources before making any connections.
1
Using a component video cable, connect the Digital TV receiver's Y, P
and P jacks to the Y, P
R
connections.
Note
This TV supports only the 480i and 480p signal format. If the TV receives a signal other
than 480i or 480p, "Non Supported Video Format" appears on the screen.
2
Using an AUDIO cable, connect the Digital TV receiver's AUDIO OUT
jacks to the TV's AUDIO IN jacks.
Note
The Y, P and P jacks do not provide audio, so audio cables must be connected to
B R
provide sound.
Rear of TV
Y
Installing and Connecting the TV
and P jacks on the TV. Use the VIDEO 3 IN
B R
P
B
P
R
AUDIO-L
(white)
Digital TV receiver
AUDIO-R
(red)
AUDIO cable
(not supplied)
B
Component
video cable
(not supplied)
19