Backupspeed Property - Citizen CL-S700 Programming Manual

2.2.21 BackupSpeed property

Syntax
int BackupSpeed
Attribute
Read/Write
Description
Sets the backup speed. See below for the acceptable values.
Value
CLS_SPEEDSETTING_A or
CLS_SPEEDSETTING_B
CLS_SPEEDSETTING_C or
CLS_SPEEDSETTING_D
CLS_SPEEDSETTING_E or
CLS_SPEEDSETTING_F
CLS_SPEEDSETTING_G or
CLS_SPEEDSETTING_H
CLS_SPEEDSETTING_I or
CLS_SPEEDSETTING_J
CLS_SPEEDSETTING_K or
CLS_SPEEDSETTING_L
CLS_SPEEDSETTING_M or
CLS_SPEEDSETTING_N
CLS_SPEEDSETTING_O
CLS_SPEEDSETTING_1
- CLS_SPEEDSETTING_8
*Initial and maximum value vary depending on the printer model.
Setter method
int setBackupSpeed (int backupSpeed)
Returns CLS_SUCCESS (0) on success. See
Getter method
int getBackupSpeed ()
Returns the set value. If nothing has been set, it returns CLS_PROPERTY_DEFAULT(999999).
Example
int backupSpeed;
printer.setBackupSpeed(LabelConst.CLS_SPEEDSETTING_O);
backupSpeed = printer.getBackupSpeed();
CITIZEN Android Label Print SDK — Programming Manual
Description
1.0 inch( 25.4mm) / sec
2.0 inch( 50.8mm) / sec
3.0 inch( 76.2mm) / sec
4.0 inch(101.6mm) / sec
5.0 inch(127.0mm) / sec
6.0 inch(152.4mm) / sec
7.0 inch(177.8mm) / sec
8.0 inch(203.2mm) / sec
1.0 inch( 25.4mm) / sec - 8.0 inch(203.2mm) / sec
"2.1 Return
38
value" for the error codes.