Senddata Method - Citizen CL-S700 Programming Manual

2.2.9 sendData method

Syntax
int sendData (byte[] data)
Parameters
Parameter
data
Description
Sends binary data to a printer.
This can be used only when sending raw printer commands to the printer.
Return value
Returns CLS_SUCCESS (0) on success. See
Example
byte[] data = new byte[] {0x01, 0x23};
printer.sendData(data);
[IN/OUT] Description
[IN] Send data
CITIZEN Android Label Print SDK — Programming Manual
Setting range
"2.1 Return value" for the error codes.
// [01]# (Reset)
25