Hdmi Setup - Sony SMP-U10 Operating Instructions Manual

HDMI SETUP

You can adjust items related to the HDMI
connection.
The default settings are underlined.
◆ HDMI RESOLUTION
Selects the type of video signals output from
the HDMI OUT jack. When you select
"AUTO (1920×1080p)" (default), the player
outputs video signals of the highest resolution
acceptable for your TV. If the picture is not
clear, natural or to your satisfaction, try
another option that suits the files and your
TV/projector, etc. For details, refer also to the
instruction manual supplied with the TV/
projector, etc.
You cannot select this when "PhotoTV HD"
mode is activated (page 16).
AUTO
Normally, select this.
(1920×1080p)
1920×1080i Sends 1920×1080i video
signals.
1280×720p
Sends 1280×720p video
signals.
720×480/
Sends 720×480/576p video
576p signals.
To reset the setting
If the picture does not appear normal or goes
blank, press [/1 to turn off the player, and
enter "369" using the number buttons on the
remote, then press [/1 to turn on the player
again.
b
In the case of "AUTO (1920×1080p)," the player
automatically adjusts the video signals to suit the
TV.
In other cases, the player directly sends the signal
even if TV cannot accept.
◆ JPEG RESOLUTION
Selects the type of JPEG resolution so that
you can enjoy high picture quality via your
HDMI connection.
You cannot select this when "HDMI
RESOLUTION" is set to "720×480/576p," or
"TV TYPE" is set to "4:3 LETTER BOX."
PhotoTV HD
Displays a extra highly-detailed
picture when connecting to a
Sony "PhotoTV HD"-
compatible device.
SD Displays a standard definition
picture with a black frame.
HD Displays a high definition
picture with a black frame.
HD Displays a high definition
picture without a black frame.
(1920×1080i) Displays a high definition
HD
picture with a black frame at
1920×1080 pixels.
(1920×1080i)
Displays a high definition
HD picture without a black frame at
1920×1080 pixels.
b
• "(1920×1080i) HD
are effective only when you set "HDMI
RESOLUTION" to "1920×1080i" and "TV
TYPE" to "16:9."
• If you set to "PhotoTV HD," "(1920×1080i) HD
" or "(1920×1080i) HD," effect, rotation and
the zoom function are not available.
• If you want to use effect, rotation, or the zoom
function, set to "SD
• If you set to "PhotoTV HD," "(1920×1080i) HD
" or "(1920×1080i) HD," the next image
appears after black mute.
• HDMI signal will stop momentarily during
loading or unloading of a USB device.
• When you set to "PhotoTV HD," the player
changes the video signal output setting in "HDMI
RESOLUTION" to "1920×1080i," "TV TYPE"
to "16:9," and "YC C
B R
"YC C " automatically, although the current
B R
settings are kept.
• Set to "SD " when you want to view photo files
via the analogue video outputs with the HDMI
connection.
◆ YC
C /RGB (HDMI)
B R
Selects the type of HDMI signal output from
HDMI OUT jack.
You cannot select this when "PhotoTV HD"
mode is activated (page 16).
YC C Outputs YC
B R
RGB Outputs RGB signals.
b
• If the playback picture becomes distorted, set to
"RGB."
" and "(1920×1080i) HD"
," "HD ," or "HD."
/RGB (HDMI)" to
C signals.
B R
,continued
25