Step 2: Connecting To Your Audio Component - Sony SMP-U10 Operating Instructions Manual

Step 2: Connecting to
Your Audio Component
Select one of the following patterns, A or B,
according to the input jack on your TV
monitor, projector, or audio component such
as an AV amplifier (receiver).
This will enable you to listen to sound.
Audio L/R input jacks
A
This connection will use your TV's or audio
component's two speakers for sound.
Digital audio input jack
B
If your audio component has a Dolby Digital
or MPEG audio decoder and a digital input
jack, use this connection. You can enjoy
Dolby Digital (5.1ch) and MPEG audio
(5.1ch) surround effect.
If you connect to a Sony audio component
that is compatible with the CONTROL FOR
HDMI function, refer to the operating
instructions supplied with the audio
component.
b
• After you have completed the connection, make
the appropriate settings in Quick Setup (page 12).
If your audio component has an MPEG audio
decoder function, set "MPEG" to "MPEG" in
"AUDIO SETUP" (page 24). Otherwise, no
sound or a loud noise will come from your
speakers.
• When you connect the player to an audio
component using an HDMI cord, you will need to
do one of the following:
– Connect the audio component to the TV with
the HDMI cord.
– Connect the player to the TV with a video cord
other than HDMI cord (component video cord
or audio/video cord).
• When connecting to the HDMI OUT jack,
carefully align the HDMI connector with the jack.
Do not bend or apply force to the HDMI cord.
10
* The yellow plug is used for video signals
(page 8).
TV, projector, or
A
audio component
INPUT
AUDIO
R
(red)
(red)
USB media
player
to DIGITAL OUT
(COAXIAL) or HDMI OUT
HDMI cord
(not supplied)
to coaxial/
HDMI digital
input
HDMI IN
Audio component
with a decoder
: Signal flow
z
For correct speaker location, see the operating
instructions supplied with the connected
components.
VIDEO
L
(white) (yellow)*
Audio/video
cable (supplied)
(white) (yellow)*
to LINE OUT
(L-AUDIO-R)
Coaxial
digital cord
(not supplied)
or
DIGITAL IN
(COAXIAL)
B