Step 3: Connecting The Ac Adaptor; Step 4: Preparing The Remote; Controlling Tvs With The Remote - Sony SMP-U10 Operating Instructions Manual

Step 3: Connecting the
AC Adaptor
Connect the supplied AC adaptor to the DC
IN 6V jack of the player.
Connect the AC
adaptor to mains
b
Stop playback before disconnecting the mains lead.
Failure to do so may cause a malfunction.
6V IN DC
DC plug
Step 4: Preparing the
Remote
Insert two R6 (size AA) batteries by matching
the 3 and # ends on the batteries to the
markings inside the compartment. When
using the remote, point it at the remote sensor
on the player.
b
• Do not leave the remote in an extremely hot or
humid place.
• Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light
from the sun or a lighting apparatus. Doing so
may cause a malfunction.
• If you do not use the remote for an extended
period of time, remove the batteries to avoid
possible damage from battery leakage and
corrosion.

Controlling TVs with the remote

You can control the sound level, input source,
and power switch of your Sony TV with the
supplied remote.
Available buttons
Depending on the connected unit, you may
not be able to control your TV using some or
all of the buttons on the supplied remote.
Buttons Operations
TV [/1
Turn the TV on or off
VOL (volume) Adjust the volume of the
+/– TV
TV INPUT Switch the TV's input
(input select) source between the TV and
other input sources
11
,continued