Sony SMP-U10 Operating Instructions Manual page 26

• If the HDMI OUT jack is connected to equipment
with a DVI jack, "RGB" signals will be
automatically output even if you select "YC
◆ AUDIO (HDMI)
Selects the type of audio signal output from
the HDMI OUT jack.
AUTO Normally, select this. Outputs
audio signals according to the
"DIGITAL OUT" settings
(page 24).
PCM Converts Dolby Digital,
MPEG, or 96 kHz/24 bit PCM
signals to 48 kHz/16 bit PCM.
b
A loud noise (or no sound) will be output if you
connect the player to a TV that is not compatible
with DOLBY DIGITAL/MPEG signals and
"AUTO" is selected. In this case, select "PCM."
◆ CONTROL FOR HDMI
Switches the Control For HDMI setting on or
off.
ON Allows you to use the
CONTROL FOR HDMI
features (page 9).
OFF
Switches this function off.
◆ LANGUAGE FOLLOW
Switches the languages of this player to that
of the current TV OSD language.
You cannot select this when "CONTROL
FOR HDMI" is set to "OFF."
ON Switches this function on.
OFF Switches this function off.
b
• Turn off any display before using this function.
• The OSD language for the player is maintained if
the TV's language cannot be supported.
26
C ."
B R