Sharpening The Picture (Sharpness); Adjusting The Delay Between The Picture And Sound (Av Sync) - Sony SMP-U10 Operating Instructions Manual

b
• This function does not work when "PhotoTV HD"
mode is activated (page 16).
• This function does not work if your TV supports
Theatre mode and it is set to "On." For more
details, refer to the operating instructions supplied
with the TV.
Sharpening the picture
(SHARPNESS)
You can enhance the outlines of images to
produce a sharper picture.
1
After selecting
on the Control Menu (page 17), press
X/x to select a level.
The default setting is underlined.
• OFF: cancels this option
• 1: enhances the outline
• 2: enhances the outline more than 1
2
Press ENTER.
The selected setting takes effect.
b
• This function does not work when "PhotoTV HD"
mode is activated (page 16).
• This function does not work if your TV supports
Theatre mode and it is set to "On." For more
details, refer to the operating instructions supplied
with the TV.
Adjusting the delay
between the picture and sound
(AV SYNC)
If the sound does not match the pictures, you
can adjust the delay between the picture and
sound.
1
After selecting
the Control Menu (page 17), press c
to select "SET t," then press ENTER.
The "AV SYNC" adjustment bar
appears.
AV SYNC
20
2
3
To reset the "AV SYNC" setting
Press CLEAR in step 2.
b
• This function is not effective if you use the
(SHARPNESS)
• This function is not effective if you connect a
• This function works for video files only.
(AV SYNC) on
0ms
Press c repeatedly to adjust the
delay.
Each time you press C/c, the delay is
adjusted by 10 milliseconds.
Press ENTER.
The selected setting takes effect.
DIGITAL OUT (COAXIAL) jack, and set
"DOLBY DIGITAL" or "MPEG" in "AUDIO
SETUP" to "DOLBY DIGITAL" or "MPEG"
respectively (page 24).
Dolby Digital-compliant device via the HDMI
OUT jack, and set "DOLBY DIGITAL" or
"MPEG" in "AUDIO SETUP" to "DOLBY
DIGITAL" or "MPEG" respectively (page 24).