Measuring Blood Oxygen Levels (Spo2); Activity Reminder - Huawei WATCH GT 2 Pro Online Help Manual

HUAWEI WATCH GT 2 Pro OnlineHelp
Opting back out of a research project
Open the 301 Hospotal's research app, touch the corresponding research project
on the home screen, touch + in the top-right corner and select to exit the
corresponding project.
You can re-join the research project later if you want to.

4.7 Measuring blood oxygen levels (SpO2)

1.
2.

4.8 Activity reminder

When Activity reminder is enabled, your band/watch will monitor your activity
throughout the day in increments (set to 1 hour by default). Your band/watch will
vibrate and turn on its screen to remind you if you haven't moved during that
time period, so you can keep a good balance of activity and rest throughout the
day.
Disable Activity reminder in the Huawei Health app if you do not want to be
disturbed. To do this, open the Huawei Health app, touch Health monitoring and
disable Activity reminder.
Issue 01 (2020-09-10)
Wear your watch correctly and keep your arm still.
From the home screen press the Up button, swipe until you find SpO
SpO . The watch will then measure your current heart rate.
2
If you are not wearing your watch, or wearing it incorrectly, an error message
will be displayed. Please read the onscreen instructions for how to wear it
correctly and touch Retry to restart the measurement.
Note:
– The measurement will be interrupted if you swipe right on the watch
screen, start a workout with the Huawei Health app, or receive a
notification for an incoming call or alarm.
– To ensure the accuracy of the heart rate measurement, wear the watch
correctly and ensure that the strap is fastened. Ensure that the band body
is in direct contact with your skin.
– Stay as still as possible during the measurement.
– Each measurement lasts for about 1 minute, and the displayed SpO
is updated every 3 seconds.
– During the measurement, the watch will also measure your heart rate.
NO TE
● To measure your blood oxygen level while mountain climbing, swipe up or down on the
climbing screen, select SpO2 then touch Measure.
● To use this feature, update HUAWEI WATCH GT 2 and HONOR MagicWatch 2 to
1.0.6.32 or later, or HUAWEI WATCH GT 2e to 1.0.1.20 or later. Update the Huawei
Health app to 10.0.5.311 or later.
● This feature is not available for users in Japan, Korea, or Taiwan (China).
Copyright © Huawei Technologies Co., Ltd.
4 Health management
. Touch
2
level
2
38