Troubleshooting - Casio XJ-H1600 Setup Manual

Check the following items whenever you experience any problem with the projector.
Problem
Power does not turn
on.
No image is projected
or the projected image
is abnormal.
Image color or display
is very abnormal.
I can't understand
messages or menus
because they are the
wrong language.
No sound
B

Troubleshooting

Cause and Recommended Action
If the POWER/STANDBY indicator is not lit, the AC power cord is not
connected correctly. Connect the AC power cord correctly.
If the TEMP or LIGHT indicator remains flashing or lit, it means some type
of error has occurred. See "Error Indicators and Warning Messages" in the
User's Guide (UsersGuide_English.pdf).
The computer or video device connected to the projector is not turned on
or it is not outputting a video signal. Make sure the connected computer or
video device is turned on, and perform the required operation on it to
output a video signal.
The correct output source is not selected on the projector. On the
projector, select the correct input source that corresponds to the
connected device.
Images may not project correctly when you have the component output
terminal of a video device connected to the COMPUTER IN (1 or 2)
terminal of the projector. Connect to the VIDEO terminal or S-VIDEO
terminal of the projector.
The wrong option ("Component" or "RGB") may be selected for the "Input
Settings COMPUTER 1 terminal (or COMPUTER 2 terminal)" setting on the
setup menu. The image will not be projected correctly if "Component" is
selected while the projector's COMPUTER IN (1 or 2) terminal is connected to
the RGB output terminal of a computer, or if "RGB" is selected while the
projector's COMPUTER IN (1 or 2) terminal is connected to the component
video output terminal of a video device. On the setup menu, select "Auto" for
the "Input Settings
setting. See the User's Guide (UsersGuide_English.pdf).
Perform the following operation to select the language you want. See the
User's Guide (UsersGuide_English.pdf).
1. Press the [MENU] key to display the setup menu.
2. If the input signal is HDMI, press [ ] four times and then press the
[ENTER] key. If the input signal is not HDMI, press [ ] five times and then
press the [ENTER] key.
3. Press [ ] twice and then press the [ENTER] key to display the language
selection menu.
4. Use the [ ] and [ ] keys to move the highlighting to the language you
want to select and then press the [ENTER] key.
5. Press the [MENU] key to exit the setup menu.
The projector's volume level setting may be too low or muted. Press the
remote controller [VOLUME] key and then use [ ] and [ ] to adjust the
volume level. See the User's Guide (UsersGuide_English.pdf).
The volume level setting of the device connected to the projector is too low
or the other device is not outputting audio. Adjust the volume level of the
connected device.
The audio output of the connected device may not be connected correctly
to the projector's AUDIO IN (1 or 2) terminal or AUDIO IN L/R terminal.
Check the connection, referring to one of the following (depending on the
type of connected device): "Connecting a Computer to the Projector" in
this manual or "Connecting to a Video Device" in the User's Guide
(UsersGuide_English.pdf)
"Line" is selected for the setup menu "Option Settings 2
setting. Change the "Audio Out" setting to "Speaker". See the User's
Guide (UsersGuide_English.pdf).
COMPUTER 1 terminal (or COMPUTER 2 terminal)"
E-18
Audio Out"