Advertisement
Use
For North America
Features
Notes
2/30
Smart Infrastructure
Microprocessor-controlled LMV36 for single-fuel burners of any capacity, with electronic
fuel-air ratio control, with up to 2 actuators, and with integrated gas valve proving.
The system components (AZL2 and actuators) are connected directly to the LMV36 in
single-fuel operation. All safety-related digital inputs and outputs of the LMV36 are
supervised by a contact feedback network.
The AGM60 dual fuel switch unit connected to the LMV36 is used for switching the fuel
valve control and the feedback signals of both fuel actuators.
Type-tested and approved in accordance with DIN EN 298
Applications in accordance with EN 676: Automatic forced draft burners for
gaseous fuels
Applications in accordance with EN 267: Forced draft burners for liquid fuels
For intermittent operation in connection with the LMV36/AGM60, the ionization probe or
the QRA/QRC optical flame detector can be used.
Continuous operation is possible only when using an ionization probe and
without AGM60.
The following components are integrated in the LMV36:
Burner control complete with valve proving system
Electronic fuel / air ratio control system for a maximum of 2 actuators SQM3 or
SQN1
Control of VSD for air fan
Modbus interface
BCI for connection a display or PC
Unit parameter adjustable either via display or PC software ACS410
Warning!
All safety, warning and technical notes given in the Basic Documentation of the
LMV36 (P7544) also apply to this document!
CC1N7544en
21.05.2021
Advertisement
