Using the Setup Menu
IScreen Settings
Use this sub-menu to specify whether projection will be from the front of the screen or the
back of the screen.
Input Source Specific Menu Items
Input Source
RGB
Component
S-VIDEO
VIDEO
No Signal
Setting Explanations
Front: For projection from the front of the screen.
Rear: For projection from the back of the screen. This setting flips the front projected
image horizontally.
Setting Storage
A single setting is stored, which is applied to all input sources.
IScreen Settings
Use this sub-menu to configure the projector for use in an installation in which it is positioned
upside down.
Input Source Specific Menu Items
Input Source
RGB
Component
S-VIDEO
VIDEO
No Signal
Setting Explanations
On:
Flips the projected image horizontally and vertically.
Off:
Projects a normal image.
Setting Storage
A single setting is stored, which is applied to all input sources.
Projection Mode
Available Items (Parentheses indicate defaults.)
(Front), Rear
Ceiling Mount
Available Items (Parentheses indicate defaults.)
On, (Off)
86