Casio XJ-450 User Manual page 72

Using the Setup Menu
2.
Perform steps 2 through 4 under "Basic Setup Menu Operations" on
page 68. On the "Input Settings" main menu, select the "Video Signal"
sub-menu item.
3.
Press the [ENTER] key.
This displays the video signal selection screen shown below.
4.
Use the [ ] and [ ] keys to highlight the item you want to select, and
then press the [ENTER] key.
5.
After you are finished configuring the settings, press the [ESC] key to
close the setting screen and return to the sub-menu screen.
After you are finished, press the [MENU] key to exit the setup menu.
Note that the available settings and configuration procedures depend on the setting
screen. See "Setup Menu Reference" on page 77 for details about each sub-menu item.
72