Casio XJ-450 User Manual page 26

Remote Controller
bm
[LASER] key
Using the Laser Pointer (page 28)
Warning
bn
*[AF/AK] key
Auto Keystone Correction and Auto Focus (page 53)
bo
*Cursor keys
To move the highlighting (selection cursor) on the menu screen ( page 68)
To perform mouse operations on the computer connected to the projector's USB por
( page 62)
* In this manual, cursor key operations are indicated as [ ], [ ], [ ], [ ].
bp
*[ESC] key
When a menu screen is displayed, to back-step to the previous screen ( page 68)
To perform a mouse right-click operation on the computer connected to the projector's
USB port. ( page 62)
bq
*[KEYSTONE] key
Keystone Correction (KEYSTONE) (page 53)
br
[D-ZOOM +] / [D-ZOOM –] keys: Press the [+] key to increase the size of the projected
Enlarging the Projected Image (D-ZOOM +/–) (page 57)
bs
[VIDEO] key
bt
[S-VIDEO] key
Manually Selecting the Input Source (page 48)
ck
[VOL +] / [VOL –] keys
Adjusting the Volume Level (VOL +/–) (page 56)
cl
[FREEZE] key
Freezing the Projected Image (FREEZE) (page 62)
: Hold down to emit a laser beam that you can use as a
pointer. The [AF/AK] key lights red while this key is
depressed to indicate that the laser beam is being
emitted.
Never look directly at the laser beam. Doing so creates the risk of
eye damage and loss of sight.
Never point the laser beam at another person. Shining the laser
beam into the eyes of another creates the risk of eye damage and
loss of sight.
Keep the remote controller out of the reach of young children, and
never allow a young child to operate the remote controller.
: Press to perform Auto Focus and auto keystone correction.
: Use these keys to perform the operations described below.
: Use this key to perform the operations described below.
: Press this key to automatically correct the projected image
and remove vertical and horizontal keystoning.
image, and the [–] key to decrease it.
: Press to select the VIDEO input terminal as the input
source.
: Press to select the S-VIDEO input terminal as the input
source.
: Press the [+] key to increase volume, and the [–] key to
decrease volume.
: Freezes the projected image.
26