Using Picture-In-Picture (P-In-P) - Casio XJ-450 User Manual

Projection Operations

Using Picture-in-Picture (P-IN-P)

While RGB is selected as the input source, you can display a sub-window that simultaneously
displays the image being input through the VIDEO or S-VIDEO terminal. This function is
called "picture-in-picture" or "P-IN-P".
RGB input
image
The initial default setting for the sub-window input source is VIDEO. Use the setup menu
when you want to change the sub-window input source to S-VIDEO. For details, see
"Input Settings
Note that P-IN-P can be used only when RGB is selected as the input source. It is not
available while any other input source is selected.
If Component is selected for "Input Settings
to change the setting to RGB in order to use picture-in-picture. Note that the initial
default setting for "Input Settings
P-in-P Input" on page 90.
RGB Input" is RGB.
RGB Input" on the setup menu, you need
59
VIDEO
(or S-VIDEO)
input image