Connecting To A Standard Video Device - Casio XJ-450 User Manual

Casio user's guide projector xj-450
Hide thumbs Also See for XJ-450:
Table of Contents

Advertisement

Getting Ready

Connecting to a Standard Video Device

You can use the projector to project an image from a video deck, TV, video camera, or other
video device. You can also output audio from the video device through the projector's speaker.
Always turn off the projector and the video device before connecting them.
Projector
Commercially available S-video cable
Bundled video cable
To S-VIDEO output terminal
To VIDEO output terminal
Video device
You can use the bundled video cable to connect to a pin jack (RCA) type VIDEO output
terminal. When connecting a video camera or other video device with a special video
output terminal, use the special cable that comes with the video device. For details, see
the documentation that comes with the video device.
Note that the projector is equipped with separate circuits for the VIDEO input terminal and
S-VIDEO input terminal. Make sure you connect the video device to the correct terminal.
The projector lets you switch the input source between RGB (or Component), VIDEO, and
S-VIDEO whenever you want.
VIDEO input terminal
S-VIDEO input terminal
AUDIO input terminal
Commercially available audio cable
To AUDIO output terminal
39

Advertisement

Table of Contents
loading

Table of Contents