Using The Laser Pointer - Casio XJ-450 User Manual

Remote Controller
2.
Load two new batteries into the case, making sure that their positive (+)
and negative (–) ends are facing correctly.
3.
Replace the battery cover on the back of the remote controller.

Using the Laser Pointer

The remote controller includes a laser pointer that you can use during a presentation to
indicate a specific item within an image. The laser is a 1mW/Class 2 Laser, which qualifies
as a "Designated Specified Product" under Japan's "Consumer Product Safety Law".
Holding down the [LASER] key causes a red laser beam to be emitted from the front
edge of the remote controller. Use the laser beam to point to the object you want to
indicate in the image.
The [AF/AK] key lights red while this key is depressed to indicate that the laser beam is
being emitted.
Warning
Never look directly at the laser beam. Doing so creates the risk of
eye damage and loss of sight.
Never point the laser beam at another person. Shining the laser
beam into the eyes of another creates the risk of eye damage and
loss of sight.
Keep the remote controller out of the reach of young children, and
never allow a young child to operate the remote controller.
28