Tare Function; Setting And Operation Of Date And Time; Battery Application - Pro XK3190-A9+ User Manual

2. when display weight deviate from ZERO, but in the range of ZERO, [ZERO] key valid,
otherwise [ZERO] will be invalid, the parameter setting and setting method of ZERO
range refers to calibration user's manual.
3. Only when STABLE light is on, ZERO is allowed to operate.
III.

Tare function

1. Normal Tare :
When Indicator at weighing status and displaying positive weight stably,
press [Tare] key, indicator will deduct the displayed weight value as tare weight, and now
indicator shows N.W is 0, TARE light is on.
2. Preset tare:
When Indicator at weighing status, press [Pre Tare] key, and indicator will display
[P *****], now indicator shows the original TARE weight. If a new TARE weight needs to
be set, please input it by Numeric keys, press [Input] to confirm it.
3. Call Tare by truck No.
In weighing mode, press [Truck No.] key, indicator will display [
correct truck No., then press [Tare], indicator will find the corresponding Tare
weight from the RAM.
In weighing mode, continuous TARE is allowed. When tare weight is zero, TARE indicating
light is off, when indicator matches the condition of ZERO, press [ZERO] to make TARE as
0, TARE light will be off.
IV.

Setting and operation of Date and Time

1. In weighing mode, press [date] to display current date and the date light will be
on. If it is correct, press [input] or [weigh] to exit, if the time is wrong, then input
the right time by numeric keys then press [input] to confirm.
2. In weighing mode, press [time], time light is on and indicator shows current time
and running automatically. If the time is right, press [input] or [weigh] to exit, if it
is wrong, input right time by numeric keys, then press [input] to confirm.
V.

Battery application

1. When only use battery as power, battery indicting light will tell the volume of
battery on the left of display. When battery is full, 3 indicating lights will be on,
when voltage is almost full, the 2 indicating lights will be only, when only 1 light is
on, that means the battery is low. Then you need to charge the battery, when
voltage is around 5.5V, indicator will cut power to protect the battery
automatically.
2. connect battery to indicator, then connect the AC power, indicator will charge the
battery automatically (fully charge need about 30 hours)
3. The battery should be fully charged for first time running.
4. battery connection line marks red socket is positive (+) connects with battery's
X K 3 1 9 0 - A 9+
13
], input
o *****