Table of Contents
Advertisement
12.8 Preparing a Unit for Storage
Defrost the unit as described in 'Defrost Freezer'. This will prepare the unit for storage.
Turn off the battery power switch (O). Turn off the freezer power switch. Disconnect
power to the battery(s) and to the freezer.
Warning: If the unit has been in service, turn it off and disconnect the power cord
connector before proceeding with any maintenance.
12.9 Preventative Maintenance
12.9.1 Freezers
Your equipment has been thoroughly tested and calibrated before shipment.
Regular preventive maintenance is important to keep your unit functioning properly.
The operator should perform routine cleaning and maintenance on a regular basis.
For maximum performance and efficiency, it is recommended that the unit be checked
and calibrated periodically by a qualified service technician.
The following is a condensed list of preventive maintenance requirements.
See the specified section of the instruction manual for further details.
.
Tips:
•
Fill by starting at the left side near the probe.
Filling with room temperature racks will result in a prolonged cool down time.
•
Fill unit with frozen product to help overall performance, frozen water jugs, for
example.
•
Always make certain the vacuum relief port is free of frost and ice, to allow for
timely re-entry into the freezer after a door opening.
Version 1.0
User Manual
35
Advertisement
Table of Contents
