Table of Contents
Advertisement
The vacuum relief port requires routine maintenance. It will ice over unless preventive
measures are taken. If the vacuum relief port becomes iced over, the freezer will take
several hours to equalize pressure.
Warning:
Do not leave the freezer unattended while the door is open.
Observe the inner side of port periodically for frost and ice build-up. Remove any frost
with a soft dry cloth. If the tube should become clogged with ice, it must be cleaned.
Make sure during cleaning that the vacuum relief tube is completely free of ice to
prevent rapid ice formation.
Factors that can affect the performance of the vacuum relief port include, high ambient
temperature and high humidity conditions and frequent door openings.
Maintenance should be performed weekly or as needed.
Warning:
Failure to maintain the vacuum relief port may result in excessive ice build-up inside the
tube, clogging the port, and inability to open the door. The vacuum relief port may need
to be cleaned more often with frequent door openings and high humidity environments.
12.7 Replacing the Battery
1. See Figure 1-6 for the location of the battery power switch, turn the battery power switch
to the off position (O).
2. Remove the left side plate fixing screw with a screwdriver to remove the left side plate,
Remove the battery mounting bracket.
3. Disconnect the battery connections.
4. Remove the old battery and install the new battery.
5. Reconnect the battery.
6. Turn the battery switch to standby mode ( I )
7. Re-install left side plate.
Warning:
The % of charge can vary depending on the age, usage and condition of the
battery. For a consistent and dependable charge, replace the battery every 2 years.
Replacement batteries must be rechargeable and are available from Being.
Refer to the parts list for stock number and description of the replacement batteries.
Dispose of the used batteries in a safe manner and in accordance with good
environmental practices.
Version 1.0
User Manual
34
Advertisement
Table of Contents
