Table of Contents
Advertisement
8.4
Install Shelves
Install the shelf clips into the shelf rails (front and back) at the desired shelf level, as
shown in Figure 1-8.
Install the shelves in the cabinet onto the clips, as shown in Figure 1-9.
Note: Maximum shelf load is 50 kg per shelf.
8.5
Remote Alarm Contacts
The remote alarm connector is in the parts bag provided with the manual. If you need to
connect to an independent alarm system, connect the alarm system to the aviation plug,
insert the remote alarm interface, and lock the nut clockwise.
The remote alarm connector is equipped with a normally open (NO) output, a
normally closed (NC) output and a common end (COM).
8.6
Attach Power Cord
Open the right bottom door, take out the power cord.
Insert the power plug into the power socket at the back of the unit.
8.7
Preparing for Start-up
Prior to first start-up, please refer to the following steps:
Version 1.0
Figure 1-7. Positioning bracket installation
User Manual
17
Advertisement
Table of Contents
