Table of Contents
Advertisement
1. Check the location of the external components of the product to ensure that the external
components of the product are not damaged.
2. See the serial tag on the side of the unit for electrical specifications or refer to the
electrical schematics in this manual. The freezer should be operated on a dedicated
grounded service. Check the voltage rating on the serial tag of the unit and compare it
with the outlet voltage. Then, with the power switch turned off, plug the line cord into the
wall outlet.
3. Check whether the power switch of the unit is in the OFF state. If not, please set to the
OFF position, ON–" I ", OFF–" O "( as shown in Figure 1-10), insert the power cord into
the power socket and turn on the power switch (I).
4. Check whether the battery switch is in the ON state. If not, please set to the ON position.
ON–" I ", OFF–" O " ( as shown in Figure 1-11), ( If you hear an alarm, press the buzzer
silence button (BUZZER) to stop the alarm )。
Note:
Make sure the battery switch is set to standby mode. "Low battery" alarm will occur
when the battery is low. Should a power failure occur during the initial start-up period,
the electronics will have limited operation.
8.8
Parameter Setting
1. After the product is powered on, the display will automatically enter the screen saver,
and the temperature in the freezer will be displayed in real time. As shown in Figure 1-
12.
Version 1.0
User Manual
18
Advertisement
Table of Contents
