Soleus Air KC-45H Operating And Installation Manual page 11

Installation Instructions (Continuous)
5. PREPARE THE CASE
A. Install the top mounting rail with 4 type B
screws from the inside of the case.
B. Insert the frames for the accordion panels
into the top mounting rail and the bottom
frame guides. Attach the accordion panels to
the side of the case using 3 type A screws on
each side.
Note: When attaching the accordion panels,
make sure to only screw the inner panels to the
case sides.
6. INSTALL THE CASE IN THE WINDOW
A. Carefully slide the case into the window and
center the case. Lower the window behind
the top mounting rail. Pull the bottom of the
case forward so that the bottom mounting rail
is tight against the back of the window stool.
Mount the case to the window sill using 4
type E screws. Drill pilot holes, if necessary.
B. Make sure the bolts and nuts are all of the
way in both the left and right V-supports.
C. Position the V-supports on the case bottom
so that they will be near the outside wall.
Attach a V-support to each side of the bottom
of the case using type C screws, 3 on each
side.
9