Bang & Olufsen BeoVision 7 Manual page 25

Changing the Beo4 batteries
When BATTERY appears in the Beo4 display,
it is time to change the batteries in the
remote control.
The Beo4 requires three batteries. We
recommend that you use Alkaline batteries
only (1.5 V – size AAA). Replace the batteries
as shown on this page. Keep a fi nger on top
of the batteries until the lid is replaced.
When you have replaced the batteries, you
must wait about 10 seconds until TV appears
in the display. The Beo4 remote control is
then ready for use.
Downloaded from ManualsNet.com search engine
2
1
3
2
1
25