Bang & Olufsen BeoVision 7 Manual page 23

Use your pincode
If your television has been disconnected from
the mains for 15–30 minutes, the television
prompts you for the pincode when you
switch it on. You may not be able to switch
the television on immediately – wait
approximately 30 seconds and try again.
PINCODE
PINCODE
MASTERCODE
MASTERCODE
NOTE! Should you lose or forget your code,
contact your Bang & Olufsen retailer. Your retailer
can provide you with a mastercode, which
disables your pincode.
Downloaded from ManualsNet.com
IMPORTANT! If you are prompted for a pincode
the first time you switch on your tele vision,
contact your Bang & Olufsen retailer.
When your television is switched on...
> Enter the code digits using the number buttons
0 . . .
or
> Press GO when the last digit is entered.
> Your television starts up again.
Five incorrect entries will cause the television to
shut down for three hours, during which
next
operation is not possible.
accept
GO
If you have forgotten your pincode...
> Contact a Bang & Olufsen retailer to receive a
0 . . . .
fi ve-digit mastercode.
> When the television prompts you for your
pincode, press and hold
MASTERCODE menu.
> Entering the code digits using the number
buttons or
next
your pincode and reactivate your television.
accept
GO
search engine
.
to bring up the
and pressing GO will deactivate
To use the pincode system again...
> Follow the procedure for activating the pincode
system.
23