Use The Dvd Player - Bang & Olufsen BeoVision 7 Manual

16
You can start and stop playback, step
between chapters and tracks and cue
back and forth on a disc. Bring up
the DVD menus to change, for
example, audio or subtitle language.
Use the DVD main menu to make
your own settings for DVD playback.
You can always resume playback of
the loaded DVD at the point where
you left off provided that the DVD
loader has not been opened.
When playing an audio CD, the
television screen is blank.
Downloaded from ManualsNet.com

Use the DVD player

Load and play a disc
To load a disc, press the load bar below the
television screen.
Place a disc in the loader with the label facing
upwards. Eight centimetre discs may only be
loaded provided with a suitable adaptor. Discs of
other shapes cannot be played.
*NOTE! If the DVD player can not recognise the
format of a loaded disc, the disc is ejected and
DVD LOAD is shown in the display window. This
may be due to disc faults such as dust, dirt, fi nger-
prints or scratches, or because the DVD is from an
incompatible region. For more information about
handling DVDs, refer to the chapter 'Maintenance
of your television' on page 24.
search engine
To load a disc and begin playback...
> Press the load bar below the screen. The loader
slides out, and the display prompts you to load
a disc.
> Place a disc in the loader as described to the left.
> Press and hold the load bar. The loader retracts,
DVD is activated and playback begins
automatically.*
Load bar
To load a DVD while watching TV, for example,
for playback at a later point in time, press the load
bar shortly. The loader retracts and playback
does not begin.
If you restart playback of a loaded disc after an
interruption and the loader has not been opened,
playback resumes at the point of interruption.