Table of Contents
Advertisement
Auxiliary functions
Auxiliary function selection keys
Select the required auxiliary functions before
starting the program.
C
Auxiliary function buttons may differ
according to the model of your machine.
Auxiliary function selection
If an auxiliary function that should not be selected
together with a previously selected function
is chosen, the first selected function will be
cancelled and the last auxiliary function selection
will remain active.
Auxiliary function that is not compatible with the
program cannot be selected. (see "Program
Selection Table")
• Prelavaggio (Prewash)
A pre-wash is only worthwhile for heavily soiled
laundry. Without pre-wash you save energy,
water, detergent and time. Pre-wash without
detergent is recommended for lace and curtains.
• Quick Wash
This function can be used for cottons and
synthetics programs. It decreases the washing
times for lightly soiled laundries and also the
number of rinsing steps. Shortens the program
time approximately 45 minutes.
• Risciacquo Aggiuntivo (Rinse Plus)
With this function, you can increase the number
of current rinsing steps. Thus, sensitive skins'
risk of being affected by the remainder detergent
on the clothes will be decreased.
• Anti-Creasing
This function reduces drum movement and
limits the spinning speed to prevent creasing. In
addition, washing is carried out at a higher water
level.
C
Use this function for delicate laundries that
crease easily.
C
Whenever you select this auxiliary function,
load your machine with half of the maximum
laundry specified in the program table.
• Rinse Hold
If you do not want to unload your clothes
immediately after the cotton, synthetics, woolen
and delicate fabrics program, you may release
your clothes inside the machine in the last rinsing
water by pressing the rinse hold button in order
to prevent your clothes become wrinkled. You
can spin by pressing "Start/Pause/Cancel"
button after this process.
• Esclusione Centrifuga (No Spin)
You may use this program if you do not want
to spin your clothes at the end of cottons,
synthetics, woolen or delicate programs.
• Spin speed reduction
You may use the speed reduction button
whenever you wish to spin your clothes below
the maximum spin speed. When speed reduction
button is pressed, spin speed will be at the
minimum rpm given on the panel.
Time delay
If you wish to wash your clothes at a later time
in machines equipped with a time delay button,
the time delay function allows you to delay the
program start time for 3, 6 or 9 hours.
When the time delaying button is pressed once,
a 3 hours delay is selected. When the same
button is pressed again, 6 hours; and if pressed
once more, a 9 hours delay will be selected. If
the time delaying button is pressed one more
time, time delaying function will be cancelled.
Time delay function starts countdown after
setting the desired time delay and pressing the
"Start/Pause/Cancel" button.
C
More laundry may be loaded during the time
delay period.
Changing and canceling the time delay.
Press the "Start/Pause/Cancel" button to switch
the machine to "Pause" mode. Press "Start/
Pause/Cancel" button to start the program after
making the new time delay selection.
Starting the Program
Press "Start/Pause/Cancel" button to start the
program. "Start/Pause/Cancel" button will light
up to indicate that the program has started. The
door is locked and the "Ready" light fades.
Progressing a program
Progress of a running program is shown through
the program follow-up indicator. At the beginning
of every program step, the relevant indicator
lamp will light up and light of the completed step
will turn off.
C
If the machine is not spinning, the program
may be in rinse hold mode or the automatic
spin correction system might have been
activated because of excessive unbalanced
distribution of laundry in the machine.
Changing the program after the
program has started
You can use this feature after your machine has
started to wash different textile groups in the
same batch of clothes under higher or lower
temperatures. You must cancel the ongoing
program in order to change the washing
program.
For example, press and hold the "Start/Pause/
Cancel" button for 3 seconds in order to select
"Cottons 40" program instead of "Cottons 60"
program. Select the "Cottons 40" program. Start
the program.
8 - EN
Advertisement
Table of Contents
