Troubleshooting - BenQ T241W User Manual

4. Troubleshooting

Symptom
*Blank Screen*
Power indicator is off
Power indicator lights orange
Power indicator lights green
"No Signal Detected!" message
*Display Problems*
Image is displaced to the left/right
or to the top/bottom
Image is blurred
Color problems
Downloaded from ManualMonitor.com Manuals
All manuals and user guides at all-guides.com
• Make sure the power cable is connected properly (see
Installation on page 4
• Make sure that the monitor was turned on using the
power switch (see
on page 4
• Perhaps a power saving mode is active? Press any key
on your keyboard or move the mouse.
• A screen saver may have activated automatically after a
certain period of inactivity. Press any key on your key-
board or move the mouse.
• Is the signal cable connected to the monitor and the
PC's graphics port (see
• Is the PC turned on (see your PC's documentation)?
• If the image appears normal but off-center, you can
adjust it using the OSD functions. For further informa-
tion, see "Auto Adjust" in the
• Check brightness and contrast settings (see "Lumi-
nance" in the
• Check the sharpness setting (see "Sharpness" in the
OSD icon list
• If the colors are off (e.g., white is not really displayed as
white etc.), you should adjust the color temperature
(see "Color" in the
Remedy
).
To connect the monitor to your PC
).
Installation on page 4
OSD icon list
section).
OSD icon list
section).
section).
OSD icon list
)?
section.
Troubleshooting 7