BenQ T241W User Manual page 6

Contrast
H. Position
V. Position
Pixel Clock
Phase
OSD H. Position
OSD V. Position
OSD Time
Sharpness
DDC/CI
Information
Volume
Audio Input
Select
Mute
DCR
Over Drive
Display Mode
Overscan
6 Adjusting your monitor
Downloaded from ManualMonitor.com Manuals
All manuals and user guides at all-guides.com
* Adjust the contrast level of the screen
* Shift the screen left or right
* Shift the screen up or down
* Adjust the monitor internal sampling clock rate
* Adjust the monitor internal signal phase
* Shift the OSD left or right
* Shift the OSD up or down
* Set OSD display duration time
* Adjust the sharp level of the screen
* Switch "DDC/CI" On or Off
* Show the display information
* Adjust the level of the sound
* Select the audio input source: Auto Detect/Line-In.
* Turn the sound to mute
* Switch "DCR" On or Off
* Adjust the level of the "Over Drive"
* Switch "Display Mode": Aspect/Full/1:1
* Switch "Overscan" On or Off
* Select On to remove the black borders around the displayed
image