Section 5 | Maintenance; Periodic Maintenance - USA Lab CLC Series Manual

Section 5 | Maintenance

5.1 Periodic Maintenance

Shut off the breaker AND disconnect the power cord before any maintenance
Use a damp soft cloth to wipe clean. Stubborn stains should be cleaned by neutral detergents.
The maintenance of internal electrical and cooling parts must be performed by professionals or trained
electricians.
Do not directly splash water over the product or use abrasive powder, diluent, oil, kerosene, acidic material,
and similar substances during cleaning, or else shock or other accidents will occur.
Fluid:
Ethanol will evaporate over time. Check and refill periodically.
Condenser:
Check and clean the condenser regularly. Every quarter for low dust facilities, or every month for high dust
facilities.
Unit:
Check the unit over monthly for leaks, broken glass, melting, burning, or any other damages.
Please bring any concerns to our attention immediately.
Gauges:
Check the refrigerant gauges regularly. If a loss of pressure is noticed. Stop using the unit immediately. Take
the unit out of commission until it can be repaired. Contact us.
5.2 Long Term Storage
Empty the unit of fluid.
Cap the inlet and outlet.
Clean the condenser.
Clean the body of the unit.
Wrap the unit with shrink wrap plastic.
Store in a secure level location.
Block the casters from rolling.
18