USA Lab CLC Series Manual page 12

Recipe Page:
This is the Recipe Page. You can have a maximum of 15 phases in each recipe. Enter a value of "0" to ignore that
phase. You can save and open your recipes by using the box outlined above. Up to 70 recipes can be stored.
To Program a Recipe:
1. Press the temperature box and edit the temperature you would like for each phase.
2. Press the time box edit the time you would like for each phase.
3. Press Save to make the change permanent.
4. When finished changing the recipe, press Apply.
5. Press Return to go back to the Operations Page.
Name and save a Recipe:
1. Press the box next to the word "Number:" then edit your recipe number.
2. Press the box next to your recipe number, then name your recipe.
3. Press Save to make sure all settings are saved.
4. Press Upload to save the recipe in memory.
5. If you wish to apply it after creating, press Apply.
Load a Recipe:
1. Press the box next to the word "Number:" then enter your saved recipe number.
2. Press the Upload button to pull the recipe from memory.
3. The name of your recipe should appear in the name field.
4. Press Apply to make the recipe active.
12