Page 2
introduction Before starting, please check all Furniture parts are going to several Valued Customer, components and accessories manufacturing procedures. During this according to the provided list. If process, parts can have little dust or We design and carefully manufacture our you purchased more than one marks.
before you start or o Get required installation tools prepared. Do not install the product on rough surfaces. Get help from someone else!
Page 4
components Part1 Part2 Part3 Part4 TOTAL 3.5x18 mm screw M8x60 mm screw...
Page 5
step a *Please attach the metal p eces #3 and #4 onto the holes on the metall c p ece #2 as shown below *Then please screw A10 (M8x60 mm screw) w th the help of a spanner...
Page 6
step b *Please put the wooden p ece #1 onto the top of the furn ture as shown below *Then please screw A09 (3,5x18 mm screw) w th the help of a power dr ll or screwdr ver. *Another way,please put the p ece #1 onto the floor,turn the frame ups de down, then screw A09 (3,5x18 mm screw ) w th the help of power dr ll or screwdr ver.
Page 7
final look Enjoy your Decorot ka product! www.decorot ka.us contact@decorot ka.com www.decorot ka.com...