Page 2
introduction Before starting, please check all Furniture parts are going to several Valued Customer, components and accessories manufacturing procedures. During this according to the provided list. If process, parts can have little dust or We design and carefully manufacture our you purchased more than one marks.
Page 5
a. installing components First, you will need to start attaching part #1 and part #4 with component A13. Please turn component A13 w th screwdr wer. b. installing components Secondly, you need to attach the part #3s just like the same way done in the first step.
c. installing components Please attach the part #4 and part #5 with given component numbered #A13. Please be careful with direction of the side holes of number #3s and #4. Side holes needs to face to the same direction to fit the holes and screws in the next step d.
Page 7
f. completing the assembly Depending on the preference, you may also mount the bookcase to the wall. First, you need to take the measurement by choosing the right space in your room and then drill the wall and attach as shown below.